![]() ![]() Every set of functions for the guitar will feature a GND pin. GND (ground) - the common connection that all electrical components must connect to in one way or another in order to complete the circuit.The pins have various functions, but for this controller mod you will need to be familiar with 4 kinds: These are labelled with a pinout (which you can find by googling pinout) and sometimes on the microcontroller itself. Around the edge of the microcontroller, you will see various solder through holes called pins. In this guide you will be using the microcontroller to replace the main board of the guitar. If you are familiar with microcontrollers and pcbs skip ahead to the "Supplies" section.Ī microcontroller is a small board that can be programmed to perform various functions. ![]() If you have no idea what a microcontroller is, start here. This guide assumes that you know how to solder, if you do not stop now and go practice soldering. Building a Directly Wired Controller Before you start: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |